!! CURRENT RELEASE of the 4351/4354/4355 AMPS/CDMA & FEX SOFTWARE !! ---------------------------------------------------------------------- Versions: SCP 7.6, AMPS 5.1, DCMMIC 10.3, DCMDSP 1.3 ---------------------------------------------------------------------- ****** Software Upgrade Notes ****** Thank you for taking this opportunity to upgrade your 4351/4354/4155 to the latest version of software. You should upgrade your unit to the current version regardless of whether you are experiencing problems or not. You will find a copy of the installation instructions (the file labeled 435xupgr.txt) in the System folder. Please read the installation instructions carefully. ********************************************************************** NOTE: Downloading and executing the file 4350tdma76.exe will extract all software upgrade files to two folders in the C:\Temp folder, labeled "System" and "Test". NOTE: You can verify which options are installed in your 435X by pressing the key and then the key ********************************************************************** After extracting the files perform the following: 1) Open the C:\Temp folder on your PC, open the "System" folder and copy the amps_mic.bin, tdma-dsp.bin, tdma-mic.bin files to a floppy disk. If you have a 4354 or 4355 copy the Tdma-cnt.bin file and label the disk "TDMA System". If you have a 4351 copy the Amps-cnt.bin file and label the disk "AMPS System". 2) Copy the files in the "Test" folder to your Calibration Disk. (If you have a Custom Test and/or Composer file use them instead of the defaults supplied here). 3) Open the APPROPRIATE (Matches your model) Composer folder from the "Test" folder and copy the composer.csl file to the "Test" disk. 4) Now access the "System" folder on your PC, and open the file "435xupgr.txt". Follow the installation instructions. --------------------------------------------------------------------- If you have any questions about the software installation process or operation of your 4351/4354/4355, please contact the Wireless Technical Assistance Center at 866-945-5835 or 317-595-2040. Fax: 317-595-2023 Email: support.us@willtek.com Willtek Communications, Inc. readme.txt 16 Apr 2003 jrw